Owl Spotlight: Suenosdejmi

I've wanted to recycle my own yarn forever, but I haven't had the courage to try it before now. I found this really excellent tutorial on the process the other night and summoned up the courage to try it. I went out thrifting yesterday and found this glorious sweater at Goodwill. The yarn's a 60/40 Cotton/Acrylic mix, and the colors are dreamy. Plus, it only cost me $2! (sorry, the picture's icky!)

When shopping, I checked for 1)types of seams 2)weight of yarn (I really wanted heavy worsted yarn, lots of sweaters are made with smaller yarns and I didn't want to go that way on the first try) 3)price (because why pay a lot for it when I don't have to!)

If you want to try this yourself, it's important to know what to look for before you get started. There are only certain sweaters that can be unraveled, some can't be due to the way they were constructed. Look at the tutorial above which shows really good detail example of the types of seams to look for. Once you get that down pat, the rest should be easy.

So, I've got my sweater with the right seams, and I started unraveling. The tutorial says to cut it, but I'm kind of a chicken, so before I started cutting, I spent some time with a small crochet hook unlacing it a bit. You can see the fine thread that the sweater's sewn together with, and once you know how to look for it, it's easy to cut. The sweater pulls right apart.

When I got to the sleeve section, I found that the sleeve would come straight out, just like frogging stitches. This is the hole where the sleeve would be attached.

After the sleeve is seperated, I went across the shoulder and around the collar. The collar was horrid! At this point I've figured out that the stitches used to connect all the pieces are slip stitches, and that if you can find them on the side and cut every few stitches, it comes apart easier and you run much less risk of cutting the sweater yarn. Once I finished the neck, I went across the other shoulder, back around the second sleeve, and back down the other seam.

Here are the 4 pieces, two sleeves and the front and back panels.

After this, I looked around for a corner, found a tied off spot, and started unraveling. :) This is the yarn from the front and back panels, I'm guessing it's about sport weight.

I haven't unraveled the sleeves yet. I'm excited about giving this sweater new life. I'm thinking the yarn shown here will be a nice scarf, double stranded, and the sleeves could definitely make some gloves. It's sooo soft, so some nice stuff will come from this.

I love the process and will definitely do this again! :)